DRAFT FEBRUARY 06
5
inserting the Battery and SIM Card
I N S E R T I N G T H E B A T T E R Y A N D S I M
C A R D
The SIM card and its contacts are easily damaged.
Be careful when handling, inserting or removing
the card.
REMOVING THE BACK COVER
>
With the back of your Vertu phone facing you,
position the back cover release key (
01
) into the
slot of the locking screw (
02
).
>
Turn the locking screw (
02
) a quarter of a turn
anticlockwise, and gently lift off the back cover as
shown.
>
Remove the plastic placeholder (
03
) from your
Vertu phone before inserting the battery.
INSERTING THE SIM CARD
.
>
Slide the retaining bar (
04
) towards the top of your
Vertu phone and then pivot upwards.
>
Insert the SIM card, ensuring that the bevelled
corner (
05
) is located top right and the gold
contact area is facing downwards.
>
Return the retaining bar to its original position and
slide it towards the bottom of the phone. The
retaining bar should firmly lock into place.
INSERTING THE BATTERY
>
Insert the battery (
06
) bottom end first with the
release tab (
07
) facing up from the rear of the
phone. Ensure that the contacts on the top end of
the battery align with the contact points (
08
) inside
the battery compartment.
>
Ensure that the battery and SIM card are seated
correctly before replacing the back cover.
Keep SIM cards and the back cover release key
out of the reach of small children.
Always switch the phone off and disconnect the
charger before removing the battery.
Retain the plastic placeholder for future use.
If you need to remove the battery, insert the
plastic placeholder before replacing the back
cover to make it easier to remove the back
cover.
01
02
03
04
05
06
07
08
08
userguide.book Page 5 Friday, February 17, 2006 11:08 AM
