3 LIST OF COMPONENTS
Components included in each order are provided below.
Quantity
Description
1
Vertiv™ WSN Gateway with DIN Rail Mounting Bracket
1
110/120V AC Wall Wart with 6.6 ft. (2 m) Cable to Barrel Plug
1
2.2 dBi Dipole Antenna with RP SMA Plug
1
Cable Assembly, 2.1 mm ID X 5.5 mm OD Locking Barrell to 6.6 ft. (2 m) Wire Leads
4
Rubber Feet (For use when DIN rail bracket is removed from enclosure.)
Table 3.1 Vertiv™ WSN Gateway Components
Quantity
Description
1
Vertiv WSN Flex T/H/Flex/Accelerometer/Buzzer sensor
2
AAA Energizer Ultimate Lithium Batteries
1
Sensor Mounting Kit. includes:
•
Sensor Hook Loop Mounting Plate (with Embedded Magnet and Rubber Feet)
•
Two 4" Zip Ties
•
Two Wall Mount Screws
•
Two Plastic Wall Anchors
Table 3.2 Vertiv™ WSN Flex Sensor
NOTE: The Vertiv WSN Flex Sensor can also be powered locally with or without batteries using a micro-USB cable (not
included with order).
Quantity
Description
1
Vertiv WSN EXBATT Extended Battery Pack (Installed between sensor and mounting kit.)
2
AA Energizer Ultimate Lithium Batteries
* Optional but recommended for control and higher polling rate applications.
Table 3.3 Vertiv™ WSN Extended Battery Pack*
3 List of Components
5
