Vertiv™ NetSure™ External Distribution Box (EDB) Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
20
10
Cable Routing
Cable entry/exit is made into a dedicated chamber at the bottom of the enclosure. Ten (10) 2.50-inch cable grommets and eight (8)
1.77-inch cable grommets are provided on the bottom of the enclosure for cable entry. There are four (4) 2-inch trade size knockouts
provided for power cable entry and fiber exit, along with two (2) 3/4-inch trade size knockouts for alarm wiring. Refer to Figure 10.1.
The DC distribution and fiber chambers provide tie-wrap lance panels on both side walls. The cable entry chamber provides a cable
tie bar. Secure wires/cables to the lace bar according to AT&T standards.
Figure 10.1 Cable Routing
(2) 3/4-inch trade-size knockouts
(1.125-inch actual diameter).
(4) 2-inch trade-size knockouts
(2.5-inch actual diameter).
(10) 2.50-inch cable grommets.
(8) 1.77-inch cable grommets.
Notes:
1. All dimensions are in inches.
Bottom
Cable Entry (Splash Zone)
Fiber Termination
Fiber Storage
DC Distribution
