SAG582120600
System Application Guide
Revision BK, September 27, 2017
Spec. No. 582120600 (Model 801DB
NVGB
)
Page 20 of 75
J1
J1
Adapter supplied with
panels E/W TPL fuses
List 148: 2400A Ground/Return Input Assembly, with Optional Bonding Strap
Features
♦
Provides additional landing points for ground/return input
leads (both sides) to the optional List
Ground/Return Bar.
♦
Increases Ground/Return Bar rating from 1200A to 2400A.
♦
Each List 148 provides two (2) Input Lug Landing Plate
Assemblies (one per side).
♦
Included is an optional bonding strap for connecting both
Ground/Return Bars together for any current requirement up
to 2400A.
Restrictions
For use with List
Internal Ground/Return Bars only.
Ordering Notes
1)
List 116 and 126 internal return bars are rated for 1200 Amps. List
is available to increase that capacity to 2400 Amps
and provide additional cable landing points. Each bay can accommodate (1) List 148. List 148 offers cable termination at
the rear of the bay and the option of a bonding strap. Mounting location (top or bottom) of List 148 will be opposite that
specified for the Input Lug Landing Plate Assemblies of List 116 or 126.
2)
Order input lugs as required per
DC Input Cable Sizes and Lugs Selection
under
Wiring Notes
in ACCESSORY
DESCRIPTIONS.
List 150: Optional Capacitor Precharge Assembly
Features
♦
Portable hand-held unit.
♦
Allows capacitors of a DC load to be initially
charged before a TLS/TPS or TPL
distribution fuse is inserted. This prevents
the fuse from possibly blowing open as it is
inserted due to high capacitor charging
current.
♦
Designed to plug directly into a TLS/TPS
type fuseholder case. An adapter is
supplied which plugs directly into a TPL
type fuseholder case.
Restrictions
and
only.
Ordering Notes
1)
Order as required.
