48 Chapter 7 Maintenance
NetSure 801 AG1 Power Supply System User Manual
Figure 7-4 First screen
5. Click
SM DU
in the top left corner (illustrated
“1”), input the port no. (illustrated “2”) (such as “COM1”), and click
Get Equipment Address
(illustrated
“3”), as shown in Figure 7-5.
1
2
3
Figure 7-5 Get Equipment Address
6. Click
, the screen will prompt,
“This operation will take a few minutes. Are you sure?” Click
Yes
to confirm.
The screen will prompt,
“Uploading data, please wait…” when the upload is finished, click
ok
to confirm.
7. Change the shunt coefficient 1 to
“2000/75”, click Enter, as shown in Figure 7-6.
