Vertiv NetSure 2100 Series, Installation Manual

Page: 74 / 86

Vertiv
| NetSure™ 2100 Series -48 VDC Power System Installation Manual (IM582138000) | Rev. C
74
Configuring the System
Mini Control Unit
Refer to the Mini Control Unit User Manual (UM1M831ANA) for detailed instructions.
Refer to
Figure 40
for locations of the Mini Control Unit local indicators and navigation keys.
Figure 40:
Mini Control Unit Local Indicators and Navigation Keys
Mini Control Unit (Controller) Initialization
The controller goes through an initialization process when power is initially applied to the system.
NOTE!
The initialization routine takes several minutes. During that time various alarm indicators may
illuminate on the controller’s front panel and an audible alarm may sound. Disregard all alarms. An
audible alarm can be silenced at any time by momentarily depressing the ENT key on the controller.
Initialization
1. After the controller is powered on, it goes through an initialization routine. See Figure 41 .
2. When initialization is complete, the language screen appears. Press the UP or DOWN arrow key to
select the desired language. Press the ENT key to confirm the selection. See
Figure 41 .
Figure 41:
Controller Start-Up
M831A
10/100M Ethernet
Port (RJ-45)
Menu Navigation Keys
Status Indicator (Green)
Minor Alarm Indicator (Yellow)
Critical or Major Alarm Indicator (Red)
MiniController
Start-Up Routine
MiniController
V6.2.01...
54.3V 0.0A
Auto Alarm
English
To Change the Language for the LCD Menus:
Press the UP and DOWN arrow keys to highlight the desired
language the menus use.
Press the ENT key to confirm the selected language.
If no key is pressed within 5 minutes, the controller selects the
default language automatically and then displays the Main
Screen.
Main Screen