Vertiv Liqui-tect LP6000, Installer/User Manual, Page: 30 / 82

FIELD DESCRIPTION
Leak Alarm Output Span
Span over which leak alarms are output. Options are:
•
5-19 mA
•
4-20 mA
Default: 5-19 mA.
Leak Alarm Output Range
Range of leak alarm output. Options are:
•
1000
•
2500
•
5000
Default: 1000.
Table 6.7 LCD 4-20 mA Output Settings fields
4.6.6 Setting a Maintenance Reminder on the Touchscreen
The Preventative Maintenance menu lets you set-up a recurring reminder alarm.
To configure the preventative maintenance reminder:
1. On the LCD display, touch
Setup
, enter a password if needed, and touch the enter key.
The Setup menu opens.
2. Touch
Up
/
Down
to highlight Preventative Maintenance, and touch
Select
.
The Preventative Maintenance menu opens.
3. Touch
Up
/
Down
to highlight the setting to configure (described in the following table), and
touch
Select
.
See Using the Keyboard and Selecting Settings on page 26 to update the setting.
FIELD DESCRIPTION
PM Alarm Every
Number of days to elapse between maintenance-reminder alarms. Range is 30 to 720 days and 0 (zero) disables
the alarm.
Default: 0 (disabled).
LCD Acknowledge Code
Sets a 4-digit, numeric code to acknowledge the maintenance-reminder alarm. Four zeros (0000) disables the
acknowledgment code.
Default: 0000 (disabled).
Text Text displayed with alarm. 4 lines of text with a 30-character-per-line limit.
Table 6.8 LCD Preventative Maintenance fields
Vertiv | Liqui-tect LP6000 Installer/User Guide | 30