Vertiv Liebert XDO, User Manual

Page: 13 / 47

Mechanical Installation 7
2.2.2. Maintenance Space Requirements
When installing, ensure to reserve a maintenance space of at least 600 mm in the front, rear, and bottom sides of the unit, as
shown in Figure 2-2 .
Figure 2-2 Maintenance Space of the Unit
Table 2-1 represents the minimum maintenance space requirements of the unit.
Table 2-1 Minimum Maintenance Space (unit: mm)
Location XDO020CS15HC
Front 600 mm
Rear 600 mm
Top 600 mm
Note 1: The side with the operation indicator light is defined as the front of the unit, and the other side is defined as the
rear of the unit. These spaces are used for regular maintenance, such as replacing filters, fans, electronic expansion
valves, and maintaining electronic control boxes.
Note 2: In case of a special application, consult Vertiv local representative.
2.3. Unpacking and Inspection
2.3.1. Transportation and Handling
1. When transporting, the priority shall be given to rail or water transportation. If user choose road transportation then a
road with better road conditions should be select to prevent excessive bumps.
2. Vertiv ™ Liebert® XDO unit is heavy. Refer Table 2-3 for weight parameters; mechanical handling tools, such as electric
forklifts are required for unloading and handling.
3. When transporting, transport the unit to the place closest to the installation site. Figure 2-3 illustrates the forklift lifting
the unit and the fork should be at the center of gravity to prevent tipping of the unit.