Vertiv Liebert MC, Installer/User Manual

Page: 13 / 73

4 EQUIPMENT INSPECTION AND HANDLING
S
AFETY
I
NFORMATION
WARNING! Risk of improperly moving, lifting, or handling. Improper handling can cause
equipment damage, injury or death. Read all of the following instructions and verify that all
lifting and moving equipment is rated for the weight of the unit before attempting to move, lift,
remove packaging from or prepare the unit for installation.
CAUTION: Risk of contact with sharp edges, splinters, and exposed fasteners. Can cause
injury. Only properly trained and qualified personnel wearing appropriate, OSHA-approved PPE
should attempt to move, lift, remove packaging from or prepare the unit for installation.
NOTICE
Risk of improper lifting. Can cause equipment damage. Make sure that the spreader bars wider
are than the unit. If the spreader bars are too short, the slings may crush the unit.
NOTICE
Risk of improper storage. Keep the unit upright, indoors and protected from dampness,
freezing temperatures and contact damage.
Upon arrival of the unit and before unpacking:
• Verify that the labeled equipment matches the bill of lading.
• Carefully inspect all items for visible or concealed damage.
• Report damage immediately to the carrier and file a damage claim with a copy sent to Vertiv™
or to your sales representative.
4.1 Packaging Material
All material used to package this unit is recyclable. Please save for future use or dispose of the
material appropriately.
Vertiv | Liebert® MCV™ Installer/User Guide | 13