Vertiv Liebert EXM, User Manual

Page: 43 / 78

Vertiv™ | Liebert® EXM™ UPS 20-100kVA, 50/60Hz User Manual | 37
5.3 Liebert ® IntelliSlot Web Card—Optional
An optional Web card is available that provides remote access to the UPS. A wide variety of status and summary
information is available through an Ethernet connection.
Figure 24 Liebert
®
IntelliSlot Web card display
5.4 Liebert ® IntelliSlot Relay Card
The Liebert
®
IntelliSlot Relay card (IS-RELAY) provides voltage-free contact closures for remote monitoring of
alarm conditions.
Delivering On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals, the
easy-to-install card integrates with AS/400 computers (additional cable required) and other relay contact
monitoring systems.
The relay card is rated for 24 VAC/DC at 1A. and supported in any of the three Liebert
®
IntelliSlot bays on the
Liebert
®
EXM.
5.4.1 Liebert
®
IntelliSlot Relay Card Pin Configuration
The card has two terminals blocks, TB1 (green, numbered 1-9) and TB2 (black, 10-18), as shown in Figure 25 .