50 Chapter 6 Battery
APM 300 Integrated UPS Single Module And Parallel System User Manual
BCB control board
UPS
Battery
+
N
-
Bypass module
J6
GND
FB
DRV
BCB
UV
220Vdc
Auxiliary
X100
OUT-P
OUT-N
AUX1
AUX2
X103
X104
X105
X106
X101
X108
X102
GND1
AUX
DRV
contactor
J8
OL
W3
USE
+12V
BAT-T
GND
W2
+12V
BAT-T
GND2
UHW241C2
Temp sensor
+
N
-
NC
12V
OUT
GND
TPM2
W3
W3
W2
Figure 6-5
Connections between UPS, BCB and BCB control board
6.5
Battery Maintenance
For the battery maintenance and maintenance precautions, refer to IEEE-Std-1188-2005 and the relevant
manuals provided by the battery manufacturer.
Warning
The batteris should be of the same capacity and type. Using different types of battery may cause fire!
Note
1. Periodically check the screws of the battery terminals for loose connection. If there is any loose screw, tighten it
immediately.
2. Check that all safety devices are present and that their functions are normal. Check that the battery management
parameters are set correctly.
3. Measure and record the air temperature in the battery room.
4. Check the battery terminals for damage and heating. Check the battery enclosure and terminal covers for damage.
6.6
Disposal Of The Used Battery
If the battery leaks electrolyte, or is otherwise physically damaged, it should be placed in a container resistant
to sulphuric acid and disposed of in accordance with local regulations.
Disused lead-acid storage battery belongs to dangerous waste, and it is a key item for disused battery
pollution control. The storage, transportation, use and disposal of the battery shall comply with the national
and local laws and regulations on dangerous waste and disused battery pollution prevention and other
standards.
Summary of Contents for Liebert APM 300
Page 1: ......
Page 2: ......
Page 7: ...The Manual Covers The Following Equipment Product Model APM 300 Liebert APM 300...
Page 9: ......
