Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
26
5.4
Materials Required for Installation
The following materials are required to install the enclosure.
Table 5.1
Materials Required for Installation
Description
Part Number
Quantity
Comments
1/2" - 13 x 3.0 Lg
SST* Hex Head Screw
140174
4
For Platform Mounting (Included)
1/2" - 13 SST* Hex Nut
P25849
4
For Platform Mounting (Included)
1/2" SST* Lock Washer
P29739
4
For Platform Mounting (Included)
1/2" SST* Flat Washer
P74233
8
For Platform Mounting (Included)
Heavy Duty Load Washer
Andrew
P/N MT-25002,
or equivalent
4
For Platform Mounting
(Available through Distribution)
Leveling Shim Kit
547061
1
(Included)
Pad Mounting Rubber Barrier Pad
145396
1
(Included)
Recommended
Anchors
(4) 1/2” Hilti HSL Heavy Duty Expansion Anchor. (Not Included)
Note: It is up to the customer to select anchors, to investigate the proper use of the anchors, and to determine
the requirements for the concrete pad to work with the anchors.
Refer to Figure 2.8 when using the pour-in-place pad template.
Recommended Ground
Bar Lug (2 AWG)
Panduit
LCDX2-14A-E
P/N 245346901
1
(Not Included)
Recommended Branch Circuit
Protection
and Wire Size for
AC Input to GFCI
External 15 A / 1-Pole
Circuit Breaker
Wire Size: 14 AWG.
1
--
(Not Included)
*SST = Stainless Steel
5.5
Recommended Anchors
Refer to Table 5.2 for recommended anchors.
NOTE!
This equipment enclosure requires four (4) of the Hilti HSL-3 anchors, used in the 4 corner positions of the enclosure
(two extra middle positions not used).
Table 5.2
Enclosure Recommended Anchors
Enclosure
Recommended Anchors
Notes
Equipment Enclosure
(Seismic Zone 4)
(4) 1/2" Hilti HSL
It is up to the customer to select anchors, to investigate the proper use of the anchors, and
to determine the requirements for the concrete pad to work with the anchors.
