HDC16045 Rev. 1.
1
Safety and Regulatory Statements
Safety Symbols
One or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to
the presence of important operating and maintenance
(servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the
user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off
switch is in the ON position.
Power Off: This symbol indicates the principal on/off
switch is in the OFF position.
Protective Grounding Terminal: This symbol indicates a
terminal which must be connected to earth ground prior
to making any other connections to the equipment.
Safety Precautions
WARNING:
To avoid a potentially fatal shock hazard and possible damage
to equipment, please observe the following precautions.
• Do not disable the power grounding plug. The grounding plug
is an important safety feature.
• Plug the power cord into a grounded (earthed) outlet that is
easily accessible at all times.
• Disconnect the power from the product by unplugging the power
cord from either the electrical outlet or the product. The AC inlet
is the main disconnect for removing power to this product. For
products that have more than one AC inlet, to remove power
completely, all AC line cords must be disconnected.
• This product has no serviceable parts inside the product
enclosure. Do not open or remove product cover.
CAUTION:
Some Vertiv products contain a lithium battery. This battery is
not a field replaceable item, and replacement should not be attempted by
a user. If errors occur when using the product and the battery is suspected,
contact
Vertiv Technical Support.
WARNING:
For Service Personnel Only - There is a risk of explosion if
the battery is replaced with an incorrect type. Dispose of used batteries
according to the manufacturer’s instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
NIAP Protection Profile
This product is certified to the NIAP Protection Profile PSS version
3.0 certification for peripheral sharing switch devices.
Installation Precautions
NOTE:
In order to comply with the product’s Common Criteria evaluation
and to prevent unauthorized administrative access to the product, the
default administrator username and password must be changed prior to
first product use.
Do not connect this product to computing devices that:
• are TEMPEST computers
• include telecommunication equipment
• include frame grabber video cards
• include special audio processing cards
WARNING:
Peripherals Warning - For security reasons, this product does
not support wireless keyboards. It is recommended not to connect a
microphone or headset to the audio output port.
Security Vulnerability
If you are aware of a potential security vulnerability while installing
this product, contact Technical Support immediately by:
• Email:
Secure
@
VertivCo
.com
• Tel: +1-888-793
-
8763
CAUTION:
Anti-tamper Caution - This product is equipped with an
always-on, active anti-tampering system. Any attempt to open the
product enclosure will activate the anti-tamper triggers, rendering the
unit inoperable and voiding its warranty.
WARNING:
Unit Enclosure Warning - If the unit’s enclosure appears
disrupted or if all LEDs flash continuously, remove the product from service
immediately and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to
verify that the RFD was not improperly used to override the current
device policy by an unauthorized person.
Cybex™ SC
DisplayPort KVM Switch
es
@2018 Vertiv Co. All Rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. Cybex is a trademark of
Avocent Corporation. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners.
While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability,
for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
Cybex™ SC920DP, SC920XP, SC940DP, SC945DP, SC945XP, SC985DP KVM Switches
