background image

AVOCENT® LONGVIEW™ 4000 SERIES

HIGH PERFORMANCE KVM EXTENDER SYSTEMS

Quick Installation Guide

590-1517-501A

   

 1

The LongView™ high performance 
extender system provides the 
fastest way to extend high quality 
DVI video, digital audio and USB data 
across your network. Transmitter and 
receiver extenders can be configured in 
a direct connect or a patch panel 
configuration to best meet the needs of 
your system. Configuration options are 
illustrated on the right, and general 
system information is provided in the 
following section. Proceed to the next 
page for installation instructions.

Supported Hardware

LongView™ 4010 and 4020 
extenders support most standard 
speakers/headsets, microphones, 
USB keyboards and USB mice. DVI 
monitors are also supported, and 
the extender system transfers 
video rates up to 165 Megapixels per 
second. LongView™ 4020 extenders also 
provide an additional video channel and 
dual stereo audio.

Cable Extension Rules 

• 

A maximum extension distance 
of 50 meters is supported with 
single, uninterrupted runs of 
CAT 7a patch or CAT 6 bulk/
trunk (not patch) cables at full 
resolution.

• 

Cable run rules: Overall cable 
runs must be reduced by 5 
meters for each additional 
cable coupling. Run 
specifications may be increased 
by 10 meters when using 
resolutions of 1280 x 1024 or 
lower.

• 

Patch cables: All patch cables 
must be as short as possible 
and no longer than 2 meters.

NOTE

: Prior to completing the 

following steps, ensure your computer is 
turned off.

1.  Connecting transmitter 

extender video

For the LongView 4010 
extender, connect a single-link 
digital cable from your 
computer to the DVI-D port on 
the extender. If using the 
LongView 4020 extender, 
connect the digital video link 
cable from the primary video 
port on the computer to the 
bottom (primary) DVI-D port on 
the extender. Then, connect the 
video cable from the secondary 
video port on the computer to 
the top (secondary) DVI-D port 
on the extender.

LongView™ Extender Direct Connect Configuration

LongView™ Extender Patch Panel Configuration

Transmitter 

Extender

CAT7a - 50 m (maximum) 
CAT6 - 50 m (maximum)

Additional video 
channel and dual 
stereo audio channels

Additional 
CATx link

Receiver 
Extender

CAT7a - 50 m (maximum) 
CAT6 - 50 m (maximum)   

Patch lead  
<2 m max

Patch lead  
<2 m max

Receiver 
Extender

Transmitter 

Extender

Patch Panel

Patch Panel

Additional CATx link

Additional video 
channel and dual 
stereo audio channels

SECONDARY

PRIMARY

Reviews: