Vertiv
™
| Liebert® AHU | Technical Manual
18
2) Remove the wooden base at the bottom of the upper cabinet.
Dismantle the L-shaped connector to separate the wooden base from the unit.
Figure 5-6 Wooden Base
3) Install eyelet and sling.
Figure 5-7 Eyelet
4) The unit needs to be protected before hoisting. Pad some thick EPE or other things between the sling and the frame of
the unit.
After completing the above steps, start hoisting.
During the hoisting process, it is necessary to ensure that the force in all directions is consistent and the unit is stable.
