Edition: 20.02.2019
DESCRIPTION: The V9 SQUIRREL is made of high tensile PES webbings having as main components: the leg loops, the waist belt and the ventral attachment ring. The
adjusting buckles are made of coated high tensile steel and the ventral ring is made of high tensile aluminum alloy. The adjustable shoulder straps “V9 TOP” can be at-
tached to the V9 SQUIRREL in order to offer additional protection when accidentally rolling upside down. V9 SQUIRREL is approved for users weighing up to 150kg and
is available in two sizes: “Adults” (waist 74 – 130 cm) and “Kids” (waist < 74cm).
The equipment can be supplied in 3 configurations: - V9 SQUIRREL (sit harness only - EN 12277 type C);
- V9 TOP (shoulder straps only);
- V9 SQUIRREL + V9 TOP (sit harness with pre-assembled shoulder straps);
ATTACHEMENT POINT: Ventral D-Ring
ACCESSORY LOOP
“V9-TOP” INSTALATION
I.
Webbing attachment CHECK & hold free ends
II.
III.
OK
Ventral D-ring
(EN 12277 type C)
● a certified connector (EN 362) ● a proper figure 8 knot
]
Use this loop to park equipment or accessories that
you need (e.g. a carabiner, a descender and other
handheld gear)!
WARNING!
The accessory loop is not suitable for support-
ing a person! NEVER use the accessory loop as
an attachment point!
TIE IN
using:
WARNING! Before use, make sure that the knot is done
correctly and tightened well or, if a connector is used,
check if it is closed and locked properly!
If there are any doubts, seek advice before using it!
1→2→3→R→4→R
1→R→2→R
Check!
