3
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
1.
Press and hold the
blue button
until you reach
step 3.
2.
On the wall control press either
direction button
.
If the button you pressed does not start the motor,
try the opposite
direction button
. Let the motor
move and press the
stop button
when the panels
reach the first desired limit. Remember which
direction button
you selected in this step.
3.
You can now release the
blue button
.
4.
On the wall control, press the
opposite direction
button
of the one selected in step 2, this will
bring the panels to the initial position in the
middle of the track where they were. The first
limit has now been set.
BLUE
BUTTON
BLUE
BUTTON
RED
BUTTON
STOP
BUTTON
5.
Press and hold the
red button
until you reach
step 7.
6.
On the wall control, press the
opposite direction
button
of the one selected in step 2. Let the
motor move and press the
stop button
when the
panels reach the second desired limit.
OPPOSITE DIRECTION
BUTTON
DIRECTION
BUTTON
STOP
BUTTON
OPPOSITE
DIRECTION
BUTTON
RED
BUTTON
DIRECTION
BUTTON
7.
You can now release the
red button
.
8.
On the wall control, press the
same direction
button
as
the one
selected in step 2. Both motor
limits have been adjusted.
IMPORTANT:
Secure the motor settings by covering the
limit setting buttons
with their cover.
Adjusting the motor limits
Summary of Contents for VTi
Page 14: ......
