User Guide
- 19 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886
/
Tel: (978) 692-7070
www.vertilon.com
Name
Function
Description
J1
IN A
Coincidence Detector Input A
J2
IN B
Coincidence Detector Input B
J3
JTAG
JTAG interface (for factory use only)
J4
TRIG OUT
Trigger output
J5
CHANNELS 1 - 16
Sensor interface board connector, PhotoniQ channels 1 through 16.
J6
DSCR OUT
Discriminator output
J7
PREAMP
Preamplifier output
J8
-HV
External high voltage power input for bias to the SiPM array
TJ1
TEST
Test input (for factory use only)
Table 3: Connectors
Name
Function
Description
LD1
STATUS
Bicolor (red/yellow/green) LED indicator for SIB916 status.
SW1: 1-2
DEV ADDR 1:0
Sets the device address for control by the PhotoniQ. Set both switches to “ON”.
SW1: 3-4
DEV TYPE 1:0
Sets the device type for control by the PhotoniQ. Set both switches to “ON”.
Table 4: LEDs and Switches
Name
Ref #
Description
+5.0V
P8
+5.0V power supply from the PhotoniQ
+3.3V
P10
+3.3V internal power supply
+1.8V
P9
+1.8V internal power supply
+2.5VREF
P13
+2.5V reference voltage
VB
P2
Bias voltage from PhotoniQ to SiPM anodes. Normally at +0.250V when PhotoniQ set to positive input polarity.
-HV
P11
SiPM array common anode voltage.
Table 5: Test Points
Summary of Contents for AFBR-S4N44P163
Page 2: ......
