Vertical WAVE IP 2500, Hardware Reference Manual

Page: 158 / 210

Integrated Services Card 2 (ISC2) 18
-
14
Chapter 18: Overview of the Wave IP 500 Chassis and Components
Wave Server Hardware Reference Guide
Telephony ports
2 analog trunk ports provide connection to the local telephone company.
2 analog station ports provide telephone service for up to 2 telephony devices, including
telephones, fax machines, and modems.
Ethernet network port
An Ethernet port located on the ISC2 functions as a LAN and Management connection point.
Audio ports
Two audio ports (one input, one output) provide connection to audio peripherals, such as a
music-on-hold device and a paging/public address system. The ports are standard 3.5 mm stereo
connectors.
Note: You must use a cable with a stereo plug to connect your music-on-hold device to the
Wave IP 500 Server chassis. If this cable is not provided with the device, you need to purchase
a separate cable. For more information about connecting audio devices, refer to Appendix B,
“Connecting Audio Devices.”
USB ports
USB1 and USB2 ports are host ports that both connect devices to the VAM.
Important: USB3 is a device port that connects to a USB host such as a laptop used for debug
console support. This port is not normally used by field service personnel and should only be
used at the direction of your Vertical support representative.
Release 2.0 Service Pack 1 April 2011