Preparation
page - 4
Remote Phone Set Up Instructions
SBX IP - IP8000 Phone Configuration Guide
Preparation
Before starting:
1. Verify that your VOIP card is installed into the system properly and that the card is
recognized in the KSU database.
NOTE
:
KSU DIP switches must be set to enable the system to retain programming
changes.
2. Set your PC IP address, default gateway, and subnet mask as shown in the table
above.
3. Set the KSU’s IP addressing using PGM 108 when logged into KSU administration
from the 24-button digital attendant station (station 100 by default).
•
This assigns the IP address to the KSU’s LAN port.
•
The configuration for the VOIP card begins here.
PCAdmin Connection
Follow the PCAdmin User’s Guide or the Tech Tip regarding setting up PCAdmin to establish
connection to the SBX system from PCAdmin on your PC.
NOTE
:
Remember that when connecting to the SBX using a LAN switch, a
straight-through patch
cable, not a crossover cable
, is required.
Configuring the VoIP Card Using PCAdmin
NOTE
:
Digital phone-based programming is shown on
page 2
.
1. Double-click
Pre-programmed
X
Configuration
.
Release 3.5
June 2010
