DX-80 Digital Executive Telephone User Guide
Page 35
Transfer
Transfer is used to deliver calls from your extension to another
extension.
Operation – Unsupervised
1. While connected to a call (outside line or intercom extension):
1.1. Press
.
1.2. Dial the destination directory number where this call is to be
transferred (extension, UCD Group, Virtual Number, etc.)
OR…
1. If your phone has buttons that have been programmed to dial
specific extensions, press the appropriate button.
2. Hang up to complete the transfer.
Operation –Supervised
1. While connected to a call (outside line or intercom extension):
1.1. Press the
button.
1.2. Dial the extension destination directory number where this
call is to be transferred.
OR…
1. If your phone has buttons that have been programmed to dial
specific extensions, press the appropriate button.
2. Wait for the called extension to answer the intercom call.
Announce the transfer.
3. Hang up to complete the transfer.
Transfer and Answer Call
'
Transfer and Answer is a convenience feature that speeds the process
of completing a transfer and answering a ringing call by making the
operation possible by one button. (This feature must be used from a
feature button that has been designated for the purpose.)
If you are the process of transferring a call and another call rings in,
you can press the Transfer/Answer button to complete the transfer and
answer the ringing call at the same time.
Operation – Setup
1. Program an available Feature Button for the Transfer/Answer
code operation. (Reference Flexible Feature Button
Programming)