Vertical DECT Cordless Telephone, User Manual

Page: 33 / 38

DECT Cordless Telephone User Guide
Registration 22
Registration
1. Press the MUTE key while in standby mode or when the LCD is showing “Not
Registered”.
2. Select “Register” by using the /vol Up/Down key and then press the MUTE key to
save your selection..
3. The LCD shows the message below. Press and hold the Left key on the Base Station
for 3 seconds. Then press the Power button, the LED blinks for 1 minute.
4. Press and hold the
/
vol Down key to clear all digits and the Handset emits a key
touch tone. When the LCD returns and shows the message below, enter the Base PIN
you want to be registered.
5. The Handset will be registered to the Base Station after the LCD shows the message
below and returns to standby mode.
Registration
Release 2.0 October 2010