Vertical Comdial DX-80, Technical Manual

Page: 193 / 322

- 193 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> P
ROGRAMMING
V
OICE
M
AIL
13. Highlight CIL X_Rate . Press Enter . to select the baud rate of the serial port. Valid options are 1200, 2400,
4800, 9600, and 19200. The default is 9600.
14. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
15. The system prompts “Save Current Setting?” Press Y to save your changes.
16. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
17. Press Esc to return to the Database Programming menu.
18. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
6.28 Programming Voice Mail
If you are using voice mail, you must program the voice mail dialing ratio. See Section 9, Programming Voice
Mail for details on how to program voice mail.
6.29 Setting Fax Ring Time
The DX-80 allows you to specify how many seconds you want it to ring a fax line before dropping the call.
6.29.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to activate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. Enter 03-36 and press save . This advances you to the Fax Ring Time field.
4. Press chg to set how many seconds you want the system to ring a fax line before dropping the call. Valid
options are 10, 20, 30, 40, 50, and 60. The default is 10 seconds.