Vertical 9133i Page 21 User Manual Download

Page: 21 / 224

Using a Wave Phone

Basic Operation

Wave Phone User Guide

Softkeys

For phones with displays, softkeys are provided that allow you to make selections on the display
when choices are offered (for example,

MENU

VMAIL

, and so forth).

Note:

Vodavi/Triad/Infinite phones do not have softkeys to select phone options.

Using the Speaker

To Make a Call

Press the line or

SPEAKER

button.

or,

Press (

on models 9133i and all Aastra Series 5 models).

Hint:

If you have a headset plugged into the phone, this action will then only toggle

between the headset and the handset. The speaker will not be available until you unplug
the headset. Also see “Using a Headset [ALL]” on page 3-38.You can also just start dialing
at this point.

or,

Press

ON/OFF

(Vodavi Phones).

Follow the usual process for making calls beginning on page 2-9.

To Answer a Call

When a call is ringing:

Follow the steps above for using the speaker.

Follow the usual process for answering calls beginning on page 2-6.

Note:

See Note above re: ViewPoint.

To End a Call (Digital and Analog Phones only)

Press

SPEAKER

to drop the active call on Vertical digital phones.

or,

Press

ON/OFF

(Vodavi Phones)

or,

Press the

RELEASE

button (if programmed).

Note:

The

button (

button on models 9133i and all Aastra Series 5 SIP phones)

cannot be used to end calls (see “Ending a Call” on page 2-8).

Wave 4.0

June 2013

Summary of Contents for 9133i

































































































































































































































Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands

Vertical 9133i, User Manual

Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands