Vertical 9133i User Manual Download

Page: 111 / 224

Message Delivery Options (Urgent or Private Messages)

Using Voicemail

Wave Phone User Guide

To add to the current message (append)

Press

to append to the end of the message, then repeat from step 2 above.

or,

To cancel the current message (without sending it)

Press

to cancel the recorded message.

Sending a Message

After you have pressed 1 to accept the recording, set any Message Delivery Options (urgent,

private, or with a callback number) as described in “Message Delivery Options (Urgent or
Private Messages)” on page 4-11. When you are ready to send the message:

To send the message to one or more extensions:

Enter the extension to which you want to send the message, then press

Repeat this step for each extension you want to include.

Hint:

If you do not know a user’s extension number, press 411, then select the user by

name. If you want to send the message to all users on the system who have voicemail
capabilities press 8888

To send the message to a Voice Mail Distribution Group:

Press

, and then enter the Voice Mail Distribution Group Number.

A Voice Mail Distribution Group is a pre-configured group of extensions. Sending a
message to the group automatically sends it to all members of the group. Ask your
System Administrator if any groups have been set up.

Press

to send the message to the designated extensions.

Message Delivery Options (Urgent or Private Messages)

Once you record a message for any reason (that is to send, reply to, or forward a message), you
can set a special delivery option as needed.

You can mark any recorded message:

•

Urgent

—

When you mark a message as “urgent”, when the recipient logs into voicemail

to listen to messages, he/she will hear messages marked as “urgent” before any other
message regardless of time received.

•

Private

—When a message is marked “private” the recipient cannot forward it, nor can

users who may share the recipient’s voicemailbox play the message. Contact your phone
System Administrator for more information.

Wave 4.0

June 2013

Summary of Contents for 9133i

































































































































































































































Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands

Vertical 9133i, User Manual

Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands