Vertical Express ICON 32, Product Manual

Page: 162 / 220

IOF Card (6300AHV001) Troubleshooting Section
©Vertical Express 4-30 Printed in USA April 2020
CAN Selector LEDs
Table 4 - CAN Selector LEDs
CAN Selector Fuses
LED Color Normal Operation Fault Operation
1 Red OFF Blinks 1/4 second ON, 1/4 second OFF
2 Green
Blinks 1 second ON, 1 second
OFF
Displays fault code 1 or 2
3 Green Not used, should be OFF
4 Green
Status of encoder phase A,
ENCA
Fault Code 2, ON Solid
5 Green
Status of encoder phase B,
ENCB
Fault Code 1, ON Solid
Fault
Codes
Description Definition Causes
1
TSMC Main Card
ID Error
A mismatch between what the
internal firmware expects for
TSMC Card ID Code and what is
detected on the board.
Problem on the TSMC Card or in the firmware.
2
TSAC Aux. Card
ID Error
A mismatch between what the
internal firmware expects for the
TSAC Card ID code and what is
detected on the board. • The TSAC not connected to the TSMC; TSAC upside down.
• Problem with the ID code on the TSAC.
• Problem with the firmware or TSMC circuity.
• Incorrect auxiliary card.
Note: The IR LEDs of the encoder are disabled.
Fuse Current Rating Function
F1 1.0A Feeds P24 from Selector CAT5 cable to 5.0VDC (P5) & 3.3VDC (P3.3) on-board power supplies.
TSMC Card (6300ACK)
For LED details, see Table 4.