i
NOTICE
This instruction manual was written to guide a professional plumber to make an easy
installation of the VERTEX Pure Water Machine. The installation shall conform to local
plumbing codes.
It is imperitive to install a pressure regulator in front of the unit or at water point of entry
to prevent this system from experiencing pressure spikes above 90 psig.
This filter system can be installed by the homeowner who has sufficient tools and
skills. Be cautioned that an extra faucet for purified water will be installed . This requires
a 7/8-inch diameter hole in the sink top. If there is not an extra hole existing, a new one
must be drilled. For a porcelain sink, this requires a special drill (7/8" Relton cutter) which
costs about $100 and requires skill to use.
ii
PARTS LIST
PARTS CONTAINED IN THE PURE WATER MACHINE CARTON
1-Box containing storage tank
1-Box with filter assemblies
1-Set of 1/4" plastic tubes, orange, black, 3/8” tubes, yellow, and white
1-clean water faucet and fittings
1-set of hardware consisting of:
Inlet water 1/4" ball valve and 1/2" feed line adapter
3/8" plastic ball valve for tank shutoff
Drain saddle clamp
