Vertex Standard VXA-710 SPIRIT Operating Manual Download Page 55

Page: 55 / 68

VXA-710 S

PIRIT

PERATING

ANUAL

ENU

(

“S

”

)

ODE

2. Emergency

Function

: Selects the Emergency feature.

Available Values

: 121.5/LED+121.5/LED

Default Setting

: LED+121.5

121.5:

Pressing the

key momentarily accesses

the 121.5 MHz Emergency Frequency.

LED+121.5: Pressing the

key momentarily accesses

the 121.5 MHz Emergency Frequency and
flashes the

BUSY/TX

lamp.

LED:

Pressing the

key momentarily flashes

the

BUSY/TX

lamp.

3. WX Alert

Function

: Selects the Alert functions when receiving the

Weather Alert Signal on the WX Channel.

Available Values

: Alrt Off/Beep/LED/Beep+LED

Default Setting

: Alrt Off

Alrt Off:

Disables the Alert function

Beep:

Sounds a loud beep when receiving the

Weather Alert Signal.

LED:

Illuminate the

BUSY/TX

lamp when receiv-

ing the Weather Alert Signal

Beep+LED: Sounds a loud beep and illuminates the

BUSY/TX

lamp when receiving the Weather

Alert Signal.

4. TEMP Unit

Function

: Selects the measurement units for the Tempera-

ture sensor.

Available Values

: °F/°C

Default Setting

: °F

5. TEMP Check

Function

: Enables/Disables the Over-Heating Alarm

Available Values

: Off/On

Default Setting

: Off

6. TEMP Set

Function

: When the “

TEMP Check

” Menu item is set to

“

,” and the temperature passes through the threshold

set in this step, the

BUSY/TX

indicator will change col-

ors, to alert you to the high temperature condition. The
color of the “High Temperature” indication is set via the
“

TEMP LED

” Menu setting (page 49).

Available Values

: [32.0 °F (0 °C)] - [230.0 °F (110 °C)]

Default Setting

: [122.0 °F (50 °C)]

NOTE

: When the temperature reaches approximately 220

°F (105 °C), the radio will disable transmission, to allow
the radio to cool off.

Summary of Contents for VXA-710 SPIRIT





































































Search results

Summary of Contents for VXA-710 SPIRIT

Reviews:

Vertex Standard VXA-710 SPIRIT, Operating Manual, Page: 55 / 68

Search results

Summary of Contents for VXA-710 SPIRIT

Reviews: