Vertex Standard VXA-150, Service Manual

Page: 5 / 32

5
Operating Manual Reprint
(Partial)
F
IELD
P
ROGRAMMING
M
ODE
The
VXA-150
’s Book Memories also allow the user to store, label, and recall channel frequencies which you may want
to use frequently while the
VXA-150
is in the Field Programming mode.
Memory Storage into the Book Memory
r
Press and hold the
PTT
and
LAMP
switches while
turning the radio on, to activate the Field Program-
ming Mode.
r
Select the desired frequency to be stored in the Book
Memory.
r
Press and hold the
[
MW
(
SPL.W
)]
key for 2 seconds.
The display will indicate “
BOOK -
” and a channel num-
ber will blink on the LCD.
r
Within five seconds of pressing the
[
MW
(
SPL.W
)]
key,
rotate the
CHANNEL
selector knob to select the de-
sired memory channel number for storage.
r
Now press and hold in the
[
MW
(
SPL.W
)]
key for 2
seconds; you will now see “ - - - - - - - - ” on the LCD. To
attach an alpha/numeric name (label) to the memory,
proceed to the next step; otherwise press and hold the
[
MW
(
SPL.W
)]
key for 2 seconds to save the entry and
exit.
r
To label a memory with an alpha/numeric name, the
next step is to use the
CHANNEL
selector knob to se-
lect any of the 48 available characters (including let-
ters, numbers, and special symbols). When the desired
first character appears, press down on the
CHANNEL
selector knob momentarily to move on to the next char-
acter.
r
Select succeeding characters in the same manner,
pressing down on the
CHANNEL
selector knob mo-
mentarily after each selection.
r
After entering the entire name (eight characters maxi-
mum), press the
[
MW
(
SPL.W
)]
key for 2 seconds to
save all data for the channel.
r
Turn the radio off, then turn the radio back on again
to begin normal operation.
A
CCESSORIES
& O
PTIONS
Supplied Accessories
Ni-Cd Battery Pack
FNB-64
Overnight Charger
NC-72B/C/U
ø
Helical Antenna
ATV-7
Headset Cable
CT-60
Operating Manual
Warranty Card
ø
:
“ B ”
suffix is for use with 120 VAC,
“
C
”
suffix is for use with 230-240 VAC, or
“ U ”
suffix is for use with 230 VAC.
Available Options
MH-44
A4B
Speaker Microphone
FNB-V57
Ni-Cd Battery Pack (7.2V, 1100mAh)
(Requires
VAC-400
or
NC-76
)
FBA-25
Alkaline Battery Case
VAC-400
Desktop Rapid Charger
NC-76B/C/U
ø
Overnight Desktop Charger
E-DC-5B
External Power Cable
CN-3
Antenna Adapter
Availability of accessories may vary. Some accessories are supplied as standard per local requirements, while others may be unavailable
in some regions. Consult your Vertex Standard Dealer for details regarding these and any newly-available options.
Connection of any non-Vertex Standard-approved accessory, should it cause damage, may void the Limited Warranty on this appara-
tus.