VX-800 O
PERATING
M
ANUAL
4
is selected by the channe selector knob.
For further details, contact your
dealer..
r
R o t a t e t h e
V O L /
PWR
knob to set the
volume level. If no
signal is present, press
and hold in the
Moni-
tor
button (the center
button on the left side)
more than 2 seconds;
background noise will
now be heard, and
you may use this to set
the
VOL/PWR
knob
for the desired audio
level.
Press and hold the
Monitor
button more than 2 sec-
onds (or press the
Monitor
button twice) to quiet
the noise and resume normal (quiet) monitoring.
O
PERATION
r
To transmit, press
and hold the
PTT
switch. Speak into
the microphone area
of the front panel
grille (lower right-
hand corner) in a nor-
mal voice level. To return to the Receive mode,
release the
PTT
switch.
r
Press the
Soft
key (if assigned to the Scan func-
tion) or switch the
Toggle
Switch to the assigned
“Scan” position (when so programmed by your
dealer) to start the scanner. The scanner rapidly
steps through each of the dealer-programmed
channels, looking for incoming calls.
