Vertex Standard VX-7200 Operating Manual Download Page 2

Page: 2 / 32

Congratulations!

You now have at your fingertips a valuable communications tool: a Vertex Standard

two-way radio! Rugged, reliable and easy to use, your Vertex Standard radio will

keep you in constant touch with your colleagues for years to come, with negligible

maintenance downtime.
Please take a few minutes to read this manual carefully. The information presented

here will allow you to derive maximum performance from your radio, in case ques-

tions arise later on.
We’re glad you joined the Vertex Standard team. Call on us anytime, because com-

munications is our business. Let us help you get your message across.

Notice !

There are no owner-serviceable parts inside the transceiver. All service jobs

must be referred to an authorized Vertex Standard Service Representative.

Consult your Authorized Vertex Standard Dealer for installation of optional

accessories.

Summary of Contents for VX-7200

































Search results

Summary of Contents for VX-7200

Reviews:

Related manuals for VX-7200

Brands by name

Popular brands

Vertex Standard VX-7200, Operating Manual

Search results

Summary of Contents for VX-7200

Reviews:

Related manuals for VX-7200

Brands by name

Popular brands