Vertex Standard VX-4600CB Operating Manual Download Page 23

Page: 23 / 36

VX-4600CB O

perating

anual

ser

enu

ode

The

VX-4600CB

includes a User Menu Mode which allows the user to define or

configure various settings, such as Squelch Threshold Level,, Beep On/Off, Dis-

play Backlight On/Off, etc. To activate the User Menu Mode:



Press (or press and hold) the

key assigned to the “User Menu Mode” func-

tion to enter the User Menu Mode.



Select the User Menu Mode item you wish to change using the [

]/[

] key,

then use the [

]/[

] key to adjust the setting of the selected item.



Press the [

] key to store the new configuration and exit to normal operation.

You may cancel the selection by pressing the [

] key.

Isplay

escrIptIon

SQL

Sets the Squelch level.

BEEP

Enables/Disables the Key Beeper.

BELL

Enables/Disables the Bell function.

LIGHT

Enables/Disables the back light of the display and keypad.

KEY

Enables/Disables the Key Lock function.

PTT

Enables/Disables the PTT Lock function.

DIMM

Sets the LCD Brightness level.

SCAN

Engages/Disengages Scanning.

Engages/Disengages Dual Watch.

Sets the minimum Audio Volume level.

CONTR

Sets the LCD Contrast level.

ENCR

Enables/Disables the disabling the Encryption feature temporarily.

L-OUT

Select the Channel Lock-out feature.

SCN-T

Sets the Scan resume time.

DUTY

Selects the Duty function of the 5-Tone Paging Decoder.

ROGER

Enables/Disables the Roger Beep.

Summary of Contents for VX-4600CB





































Search results

Summary of Contents for VX-4600CB

Reviews:

Related manuals for VX-4600CB

Brands by name

Popular brands

Vertex Standard VX-4600CB, Operating Manual

Search results

Summary of Contents for VX-4600CB

Reviews:

Related manuals for VX-4600CB

Brands by name

Popular brands