Vertex Standard VX-456, Operating Manual

Page: 23 / 44

VX-456 O
perating
M
anual
21
s
can
m
ode
s
elect
(
Press the
[
B
]
key
)
Press the [
B
] key to select the scan mode. Press the
[
B
] key repeatedly to select the desired Scan Mode.
r
Open Scan (“
SCMD OPN
” will appear on the
display)
The scanner will search the all “flagged” chan-
nels, looking for active ones. When receive the
signal, the scanner will halt and resume accord-
ing to the programmed resume time.
When press the PTT switch in the Open Scan
mode, transmission is inhibited while scanner is
activated, or disable the scanner while scanner is
paused.
r
Group Scan
(“ SCMD GRP ” will appear on the
display)
The scanner will search the all “flagged” chan-
nels and priority channel, looking for active
ones. When receive the signal, the scanner will
halt and resume according to the programmed
resume time.
When press the PTT switch in the Group Scan
mode, the radio transmit on the Priority Chan-
nel while the scanner is activated, or the radio
transmit on the Busy Channel while the scanner
is paused.
r
Priority Scan
(“ SCMD PRI ” will appear on the
display)
The scanner will search the all “flagged” chan-
nels and priority channel, looking for active
ones. When receive the signal, the scanner will
halt and resume according to the programmed
resume time.
In the Priority Scan mode, press the
PTT
switch
to disable the scanner.
p
rIorItY
c
Hannel
s
et
(
Press and hold the
[
B
]
key
)
Press and hold the [ B
] key to assign/remove the
current channel to/from Priority Channel “flag”.
The Priority Channel “flag” sets individually to the
Group Scan and Priority Scan modes.
When you assign a “flag”, a small “
P
” icon will ap-
pear at the upper right corner of the display.
When you remove a “flag”, a small “
P
” will disap-
pear from the display.
a
dvanced
o
peratIon