Vertex Standard VX-4200 Series, Operating Manual, Page: 17 / 44

VX-4200 S
ERIES
O
PERATING
M
ANUAL
H
ORN
A
LERT
Press the assigned programmable key to turn the Horn Alert function “ON” or “OFF.”
If you receive a call from the base station with 2-Tone, 5-Tone or DTMF signaling,
horn alert will be activated and your vehicles horn will sound.
When you turn the Horn Alert “ON,” a tone will sound and the “ ” icon appears
will appear on the display.
P
UBLIC
A
DDRESS
Press the assigned programmable key to use the transceiver as a PA amplifier. When
you enable this function, a tone sounds and “
Public ADRS Public ADRS
Public ADRS Public ADRS
Public ADRS
” will appear on the dis-
play. The public address can be used even while scanning and receiving a call.
EXT. ACC1
Press the assigned programmable key to toggle output port on “1” “on” and “off.”
EXT. ACC2
Press the assigned programmable key to toggle output port on “2” “on” and “off.”
D
IRECT
CH#1
TO
D
IRECT
CH#4
Press the assigned programmable key to recall the Dealer pre-programmed channel
directly.
REC/PLAY
(
V
OICE
S
TORAGE
: O
PTION
)
This function, which requires the optional Voice Storage Unit, allows you to record
and play back incoming receiver audio.
Recording:
Press the assigned Rec/Play programmable key for more than 1.5 seconds to toggle
the recording feature “on” and “off.” If the incoming signal is being heard through
the speaker when the recording feature is set to “on,” the received audio will be
recorded. The last 2 minutes of incoming audio will be stored on a first-in, first-out
basis.
Playback:
Press the assigned Rec/Play key momentarily to start playback. During playback,
pressing then [ S
] key lets you jump forward 8 seconds, while pressing the [
T
] key
lets you go back 8 seconds. To stop playback before the stored message is complete,
press the [
A
] key.
A
DVANCED
O
PERATION
13