Vertex Standard Pilot III, Operating Manual

Page: 43 / 60

VXA-300 P
ILOT
III O
PERATING
M
ANUAL
41
P
ROGRAMMING THE
USER K
EY
A
SSIGNMENTS
Default VXA-300 functions have been assigned to “Pri-
mary” (press) and “Third” (press and hold in) function of
the front panel’s [
USER
] key at the factory. These may be
changed by the user, if you wish to utilize another function
on this key.
To program the function assigned to the [ USER
] key:
Press the [ F
] key, then press the
VOLUME knob to
activate the Menu (“SET”) mode.
Rotate the DIAL knob to select the Menu Item to be
configured #18 “ KEY1 ” which is tied to the primary
function, or #19 “
KEY2
” which is tied to the third func-
tion.
Press the VOLUME knob momentarily, then rotate
the
DIAL
knob to select the function you wish to as-
sign to the [ USER
] key.
When you have made your selection, press the VOL-
UME knob to save the new setting, then press the PTT
switch to exit the Menu (“SET”) mode.
The available selections include: no / ANL / PA / EQ
ANL
: Receiver Automatic Noise Limiter (on)
PA : Public Address Mode (see page 24)
PIT
: Pitch Control (see page 22)
no : Disables the key