Vertex Standard HX150, Alignment Manual

Page: 4 / 4

FCC ID: K6630563X20
IC: 511B-30563X20
Alignment
YAESU MUSEN Co., Ltd.
4
Adjustment of the Squelch Tight
ˆ
Connect the RF signal generator to the antenna jack.
ˆ
Set the output frequency at 156.8000MHz with standard modulation (±3.0kHz deviation,
1kHz modulation).
ˆ
Set the output level to +0dBµ.
ˆ
Press the [ SCAN/DW ] key till “ tI ” is displayed.
ˆ
Press [
PRESET
] key to obtain the squelch tight level.
ˆ
Press [ VOL/SQL ] key to fix the alignment data.
Adjustment of the Squelch Threshold
ˆ
Connect the RF signal generator to the antenna jack.
ˆ
Set the output frequency at 156.8000MHz with standard modulation (±3.0kHz deviation,
1kHz modulation).
ˆ
Set the output level to -7dBµ.
ˆ
Press the [ SCAN/DW ] key till “ tH ” is displayed.
ˆ
Press [[
PRESET
] key to obtain the squelch threshold level.
ˆ
Press [ VOL/SQL ] key to fix the alignment data.
This completes the Software Alignment Mode. To save all settings and exit, press and hold
the [16/9] key for one second. Then turn off the transceiver.