EVX-S24 O
PERATING
M
ANUAL
31
U
SER
S
ET
(
M
ENU
)
M
ODE
The “User Set” (Menu) Mode allows the user to defi ne or confi gure various settings, such
as Squelch, Key lockout confi guration, etc. The basic operation method of the “User Set”
(Menu) Mode is as follows:
Press the [
MODE
(
)] key to enter the “User Set” (Menu) Mode.
Select the Set Mode item you wish to change using the [
]/[
] keys, then press the
[
MODE
(
)] key.
Adjust the setting of the selected item using the [
]/[
] keys.
You may revert to the previous step by pressing the [
SIDE
] key.
Press the [
MODE
(
)] key to save the new setting and exits to normal operation.
You may exit to normal operation without saving the new setting by press and holding the
[
MODE
(
)] key.
The possible setting features are listed at the right box, and their operations are explained
from next page. In this chapter, the following icons are used to indicate item (or feature)
supported in either the “Analog” mode or “Digital” mode:
: Indicates an “Analog” mode only feature.
: Indicates a “Digital” mode only feature.
For item (or feature) that are available in both “Analog” and “Digital” modes, no icon is
shown.
LIST
Digital Contact List
5-Tone Code Select
2-Tone Code Select
DTMF Code Select
MDC1200 ID Select
Group
Scan
Utility
Monitor
SQL OFF
Power
Minimum Volume Level
Beep
Beep Level
SQL Level
Lighting
ENCR
Privacy Select
Lone Worker
Bell
PRI-2
TA
Scan Set/Skip
Group Scan Set/Skip
Duty
TX Save Disable
Lock Key
Lock PTT
DIAL
Message
History
LOCK
There is function which is not called depending on the state of the operating channel
when entering the User Set (Menu) Mode.
For example, if you are operating in a “Digital” channel, the SQL SET function has not
been recalled.