Vertex Standard EVX-5400, Operating Manual

Page: 30 / 40

EVX-5400 O
pErating
M
anual
28
a
dvancEd
o
pEratIon

Press the [ P1
]/[
P2
] keys to select other received message, or press the [
P3
]
key to return to the top of the “IN BOX” function.
Delete (Individual message)

Press the [ P1
]/[
P2
] keys to select the received message you wish to delete.

Press the [

] key at once (or press the [

] key twice) to select the “
DELETE ”
menu, then press the [ P4
] key. The display indicates “
DEL Y/N
”(“
Y
” is
blinking).

Press the [ P4
] key again to delete the selected message. You may cancel the
deleting the message by pressing the [
P3
] key.

Press the [ P1
]/[
P2
] keys to select other received message you wish to delete,
or press the [
P3
] key to return to the top of the “IN BOX” function.
Delete (All messages)

Press the [ P1
]/[
P2
] keys to select the “
ALL DEL
” menu which is located at
the last message loop, then press the [
P4
] key. The display indicates “
DEL Y/
N
”(“
Y
” is blinking).

Press the [
P4
] key again to delete the all messages. You may cancel the
deleting the all messages by pressing the [ P3
] key.
WRITE
: You may create a sending message and send/save it in this function if
you use with the optional
MH-75
A8J
16-Keypad Microphone. The
EVX-5400
can
memorize up to 24 messages include pre-programmed message which determined
by the CE142 Programming Software.
Create the message

Create the message using the [ 0
] - [
9
] key (for select the character) and [
A
]/[
B
]
keys (for select the digit). The
EVX-5400
can create up to 32 characters.
You may delete the current character by pressing the [
Ý
] key, or insert the
space character by pressing the [
#
] key.

Press the [ D
] key, then press the [
A
]/[
B
] keys to select the “
SEND
” or “
SAVE
”
menu depending on your purpose, and move to each step as follow.
Send the message

Press the [ D
] key, then press the [
A
]/[
B
] keys to select the “Call ID” you wish
to send a message.
You may enter a new “Call ID” manually by following operation:
l
Press the [
A
]/[
B
] keys to select the “
MANUAL ” menu which is located
at the last “Call ID” loop.
l
Press the [
D
] key, then enter the “Call ID” using the [
0
] - [
9
] key.

Press the [ D
] key again to send the message. The display indicates “TEXT
MSG” and “Call ID” alternately while sending the message.