EVX-539 O
pErating
M
anual
24
rEsEt
Press (or press and hold) the assigned
PF
key to reset
the RFC (Ready for Communication) condition.
c
all
1
to
c
all
5
Press, (or press and hold), the assigned
PF
key to
send a pre-defined 2-tone Sequential Tone Group (on
an
analog channel
) or a pre-defined Digital Contact
List (on a
digital channel
).
c
odE
u
p
/d
oWn
Press, (or press and hold), the assigned
PF
key to
select a 2-Tone or 5-Tone encode code from the pre-
programmed encode list.
c
odE
s
Et
You can change the desired digit of the 5-Tone en-
code code using this function:
Press, (or press and hold), the assigned
PF
key.
Enter the desired 5-Tone encode code directly
from the keypad ([
0
] - [
9
] key and [
Ý
] (wild
card) key).
Press the [
D
] key to store the new setting. The
display indicates “
- SET -
” briefly, then reverts to
the normal channel indication.
You may cancel the new setting by pressing
the [
C
] key. In this case, the display indicates
“
- CANCEL -
” briefly.
s
pEEd
d
Ial
Your Vertex Standard dealer may have pre-pro-
grammed Auto-Dial telephone number memories into
your radio.
To dial a number, press, (or press and hold), the as-
signed
PF
key, then press the keypad ([
0
] - [
9
] key)
corresponding to the Auto-Dial memory number list
provided by your Vertex Standard dealer or Network
Administrator. The DTMF tones sent during the dial-
ing sequence will be heard in the speaker.
dtmF c
odE
s
Et
Press, (or press and hold), the assigned
PF
key to
start entering the DTMF dialing sequence.
Enter the DTMF digit directly from the keypad
([
0
] - [
9
] key).
After entering all DTMF digits, press the
PTT
switch to transmit the DTMF code.
a
dvancEd
o
pEratIon
FCC ID: AXI11154620
IC: 10239A-11154620
