40
Ultra
TRAK
TM
Viewing Results on a Personal Computer
Results in memory can be transmitted to the personal Interface Cable
are required before installation. The software can be downloaded from
www.vertexdiagnostics.com. The interface cable is an optional accessory.
To learn more about Health Care System Software or to obtain an Interface
Cable separately, please contact your local customer service.
Step 1 Install Software
Install Health Care System Software on your computer by following the in-
structions provided on Vertex’s website:www.vertexdiagnostics.com.
Step 2 Connect to Personal Computer
Connect the interface cable to the serial port in your computer. With the
meter turned off, connect the Interface Cable to the Data Port of the me-
ter. "PC" will appear on the display, indicating that the meter is ready to
transmit data.
Step 3 Transmit Data
Follow the instructions provided in the software to transmit data. Results
transmitted will include date and time. Remove the cable and the meter will
automatically turn off.
While the meter is connected to the PC, it is unable to perform
a blood glucose test.
PLEASE NOTE