ASSEMBLY INSTRUCTIONS: SLIM-TILT
PAGE 2 OF 2
STEP THREE
ATTACH BASS TO STRETCHER BAR WITH (4)
5/16-18 X 5/8” BOLTS AND (4) LOCK WASHERS
AS SHOWN. DO NOT TIGHTEN.
STEP FOUR
PULL RELEASE HANDLE TOWARDS YOU
HOLDING ONE OF THE BASES TO PREVENT
FROM FALLING, LAY BASES ON ITS SIDES AS
SHOWN
3
4
STEP FIVE
INSTALL (2) 5/16-18 X 2.5” BOLTS, (2) LOCK
WASHERS AND (2) WASHER PLATES AS SHOWN.
TIGHTEN ALL 6 BOLTS.
STEP SIX
RETURN BASES TO THE INITIAL POSITION.
YOU SHOULD HEAR A “CLICK.” FLIP THE
TABLE OVER AND SET IT ON THE FLOOR.
270.INS.ST 614