INSTALLATION STEPS
Step 1. Installing the Light Fixture onto a Junction box
Remove the Universal mounting bracket (E) from the light fixture by loosening the Light fixture mounting screws.
Feed the fixture wires through the Universal mounting bracket (E) and through the EVA gasket (F) before
mounting to the junction box wires.
I
Light Fixture
A
t
I
,I,
C
s
Light Fixture Mounting screws
Light Fixture Mounting screws
Electrical Junction Box Not Included
t --
Decorative Screw Covers
EVA Gasket Wire Nuts
WARNING:
Risk of an electric shock. Disconnect power at fuse or circuit breaker before installing or servicing
the Light Fixture.
Step Z. Connect the light fixture wires to the junction box wires with the Wire Nuts (G}.
Make sure the polarity is correct and do not install more than one motion sensor light on one
wall switch.
■ Connect the black wire (live wire) from the AC power cord to the
single black wire coming from the light fixture using one of the
supplied wire nuts (G). Black to black (L).
■ Connect the white wire from the AC power cord to the single
white wire coming from the light fixture using one of the supplied
wire nuts (G). White to white
(N).
Step 3. On completion of the wiring connections,
Place the EVA Gasket (F) to cover the junction box sides and mount
the universal mounting bracket (E) onto the junction box tightly using
the Junction Box Mounting Screws (D). Seal around the junction box
rim with Silicone to minimize water entering between the EVA Gasket
and junction box.
Black to Black (Live)
White to White (Neutral)
Align the light fixture with the universal mounting bracket (E) and mount and secure it with two Light fixture
Mounting screws (C). Finally
,
cover the screw heads with the Decorative Screw Covers (B).
---------4--------
Summary of Contents for VSL95
Page 4: ......