4
As Easy as 1—2—3!
1. Unfold and lock the frame
Release the Hook & Loop strap holding the
frame to the luggage rack and wrap around the
frame tube for storage see figs. 1a & 1b.
Standing on the chain side of the bike, swing the
front and rear halves of the bike into position.
Slightly lift up the quick connect lever, spring
loaded locking pin assembly to allow the two
halves of the frame to align. Release the assem-
bly, allowing the locking pin to engage into posi-
tion, see fig. 1c. Rotate the assembly into its
safety lock position and fold down the quick con-
nect lever. Be sure that the spring loaded bolt is
tight and the fold down lever rests against the
surface, see fig. 1d. It should lock firmly in place.
Always ensure the connection is properly se-
cured before riding.
2. Unfold and lock the handlebars
Swing the handlebar assembly up into position,
align the wedge shaped
block into upright position
and tighten the handle
bar lock handle, see fig. 2.
Always ensure it is secure-
ly tight before riding.
3. Unfold and lock the pedals
The folded pedal is held in position by a spring
loaded locking mechanism, see fig. 3a. Simply
unfold the pedal and ensure it locks into its rid-
ing position, see fig. 3b. Release the pedal as-
sembly making sure it locks into position to se-
cure the pedal, see fig. 3c.
Repeat for other pedal.
Adjust the seat assembly for comfortable rider posi-
tion as described in this manual. Always ensure the
seat clamp is securely tightened before riding.
Unfolding
3a
3c
3b
2
1a
1b
1c
1d
Summary of Contents for Verso KT499-400
Page 8: ...8...
