background image

Folding For Storage 

NOTE — This manual is only meant to act as a guide.  KETTLER recommends that your bike 
be regularly serviced by a qualified bike mechanic 

3a 

3b 

3c 

As Easy As 3—2—1! 

 

3.  Unlock and fold the pedals 

 
Using your thumb, compress and hold the spring loaded pedal assembly (3a).   
 

Fold the pedal into its folded position (3b). 
 
Release the pedal assembly making sure it locks into position to secure the pedal (3c). 
Repeat for other pedal.   

 

2.  Unlock and fold the handlebar assembly 

 
With the stem locking lever in the closed position,      
rotate the secondary safety lock to unsecure the stem 

locking lever (2a). 
 
Pull stem locking lever away from the stem and fold 
down the handlebar assembly (2b-2c). 

 
Note  — Always ensure the stem connection is properly 
secured before riding.   
Check and Adjust Stem Locking Lever regularly.  To ad-

just frame locking lever, slowly turn the adjustment bolt 
in the stem locking lever using a Phillips head   

     

screwdriver in 1/16 increments.  Failure to effectively 
adjust the   lever could result in the Stem Locking Lever 

being too tight or too loose.   

2c 

2a 

2b 

Summary of Contents for KC720-220

























































Reviews: