When connecting to a 100BASE-FX device using fiber cable, make
sure the TX connector of the adapter is connected to the RX con-
nector of the device and RX connector is connected to the TX
connector of the device.
Connecting 100BASE-FX Fiber Cable
In order to have a reliable communication between two ends, the
speed and duplex configuration of the adapter's FX port and the
device at the remote end must be same. Configure the driver of the
adapter as follows:
Link/Speed Setup 100BASE-FX Connection
Auto Mode 100Mbps, Full duplex
100M_Half 100Mbps, Half duplex
Other settings are not suggested.
14
