-21-
2.9 Making Fiber Connection
The dual-speed SFP slots, Port 3 and Port 4 must be installed with an SFP fiber transceiver for making fiber
connection.
Types of the SFP Fiber transceivers supported:
1000Mbps based 1000BASE-X SFP transceivers
100Mbps based 100BASE-FX SFP transceivers
Installing SFP Fiber Transceiver
To install an SFP fiber transceiver into SFP slot, the steps are:
1. Turn off the power to the switch.
2. Insert the SFP fiber transceiver into the SFP slot. Normally, a bail is provided for every SFP transceiver.
Hold the bail and make insertion.
3. When the SFP transceiver is seated securely in the slot, place the bail in lock position.
Connecting Fiber Cables
LC connectors are commonly equipped on most SFP transceivers. Identify the TX and RX connector before
making cable connection. The following figure illustrates a connection example between two fiber ports:
Summary of Contents for SF70460MP
Page 14: ...14 Dimensions...
Page 16: ...16 Dimensions...
