※
All specification is subject to change without notice to improve the quality.
SPECIFICATION
Model No.
Image Sensor
Effective Pixel
Cell Size
Scanning System
Sync. Type
Resolution
S/N
Video Output
OSD
Sense up
AGC
DNR(3D)
Gamma
White Balance
Shutter Speed
Backlight
Motion Detection
Privacy Zone
Mirror
Freeze
Day & Night
LED Brightness
DIS
Digital Zoom
Blemish Compensation
Impact Detection
Communication(option)
Lens
Power Supply
Current Consumption
Fan, Heater
Operation Temp.
Preservation Temp.
Dimension
Weight
1/3" SONY SUPER HAD CCD
768(H) X 494(V) PIXEL(NTSC), 752(H) X 582(V) PIXEL(PAL)
6.35 (H) X 7.4 (V)(NTSC), 6.5 (H) X 6.25 (V)(PAL)
2:1Interlace
Internal/ Line-Lock(option)
700 TV-LINE(COLOR), 750 TV-LINE(B/W)
52dB or More(AGC OFF)
1.0 Vp-p(Sync. Negative) Termination 75
γ
= 0.45 typ.(0.45, 0.6, 1.0, user)
Yes(Multi Language)
ATW(2,500°K ~ 9,500 °
K)/MANUAL/AWC
1/60(1/50) ~ 1/100,000sec
Auto(Selectable limit 2X~256X)/FIXED/OFF
BLC, LWDR,DWDR, HLC(ON/OFF)
LOW/MIDDLE/HIGH/OFF
LOW/MIDDLE/HIGH/OFF
ON/OFF(240 Block)
ON/OFF(8 Zone)
H/V/BOTH/AUTO(option)
ON/OFF
ICR(AUTO, COLOR, B/W)
70pcs(LOW, MIDDLE, HIGH, OFF), Dynamic IR
ON/OFF
ON(10X)/OFF
AUTO/OFF
LOW/MIDDLE/HIGH/OFF
RS-485(Protocol : Pelco D, Pelco P)
Day & Night Vari-focal auto iris lens
12V DC ± 10%(24V AC : option)
Max. 1.3A(at 12V DC, 24V AC) : LED ON
Yes
-20
℃
~ 50
℃
-20
℃
~ 60
℃
141.9(W) X 80.2(H) X 183.3(D)mm
Approx. 1.7kg
Ⅱ
㎛
㎛
㎛
㎛
Ω
FUNCTION SETTING
1. OSD menu structure
Zoom & Focus fixing screw
Focal length adjustment direction
1. Unfasten the '+' type screw inside
2. Adjust two trimmers properly
3. Tighten the scew
When you tighten the screw,
don't put stress excessively.
<Caution>
0.01Lux(F/1.2), 0.0003Lux(Sense up),
0Lux(70M Range at LED HIGH) - Indoor
Min. Illumination
①
SET :
②
③
:
④
⑤
:
⑥
EXT-VIDEO :
⑦
DEBUG PORT :
⑧
ZOOM,
⑨
FOCUS
Used to access the menu and confirm selection.
It is used for upgrading the product function and
after-sales services.
:Use a '+'type driver for adjusting zoomand focus.
UP,
DOWN
LEFT,
RIGHT
Used to move the cursor to up or down.
Used to move the cursor to left or right and change
the value.
Extra video output terminal for installation.
Plug your test monitor in hear. The cable is option.
2. OSD menu structure
ㆍ
The ' ' icon appeared with desired function, press the set button to move sub menu.
ㆍ
The '- - -' icon appeared with function that is unavailable according to function setting.
3. How to control through RS-485 communication(option)
4. Cable array(option)
1) Match the camera with controller's ID, baudrate and protocol
2) Up, Down, Left and right of Jog lever is same as Up, Down, Left and
right of RS-485 controller
3) Enter of Jog lever is the same as menu key or IRIS open key of RS-
485 controller
A : BLUE(MOTION)
B : BLACK(GND)
C : GREEN(IMPACT)
D : BLACK(GND)
E : ORANGE(RX +)
F : WHITE(RX -)
MOTION ALARM
GND
IMPACT ALARM
GND
RX +
RX -
A
B
C
D
E
F
FUNCTION
ㆍ
If the camera detected motion when using Motion & Impact
function, outside line of motion alarm connect with GND(B).
ㆍ
If the camera detect impact, outsie line of impact alarm connect
with GND(D).Outputs of Motion & Impact are 'open collector'.
ㆍ
Max current & voltage are 200mA and 30V DC.
RS-485A
RS-485B
REMARK
No.
0~99
AUTO
OFF, LOW,
MIDDLE, HIGH
OFF,
X2~X256
OFF, ON
0~20
OFF, ON
OFF, LOW,
MIDDLE, HIGH
OFF, ON
0~60
OFF, ON
0~20
ATW
MANUAL
AWC
↓
0~255
0~255
0~255
0~255
AUTO
COLOR
B&W
65~160
30~125
3~12
OFF, ON
OFF, LOW,
MIDDLE, HIGH
OFF,
MODE1,
MODE2
OFF,
VERT,
HORI,
BOTH,
AUTO(option)
0~49
OFF, ON
OFF, ON
0~50
OFF, ON
X1.0~X10
-128~ 127
-110~109
OFF, ON
OFF, ON
NONE
MESSAGE
0~120
1~15
OFF, ON
1~15
Fixed focal lens or Vari-focal auto iris lens
Adjust the brightness
Shutter speed auto adjustable
Select shutter speed manually
Determines that use the AGC function or not
and AGC level selectable(You can not use the
Auto D&N change mode when AGC is off)
Using sense up when it is low luminance(OFF,
x2~x256 selectable)
BLC function
Adjust BLC level
Select LWDR
Digital Wide Dynamic Range
High Light Mask function
According to the threshold value, the camera
will recognize as High light or not.
Reduce noise in low illumination
Level is selectable
Color temperature 2500 ~ 9500°K
Adjust the Red or Blue values
Move the camera lens toward to white paper
then press the set button to find the optimal
white balance for current environment
Adjustthe Red value to shiftthe color ofthe object
Adjust the Blue value to shiftthe color ofthe object
Adjust Red tone of the image
Adjust Blue tone of the image
Auto day&night switching mode
Fixed at color(LED OFF)
Fixed at B/W(LED level selectable)
Select brightness ofillumination about changing
the day
↔
night mode
Select the duration time about changing the
day
↔
night mode
Determines whether to transmit the burst signal
or not in B/W mode
IR LED OFF/ON and output level adjustable
When IR LED is turned on in B/W, the objects
can be clearly identified due to the function
that decreases screen saturation of objects
within a short distance.
VERT : Set a vertical image inversion
HORI : Set a horizontal image inversion
BOTH : set a image rotation
AUTO : Automatically rotate the screen according
to the camera's position
Sharpness adjustable
Gamma adjustable
Get a still image
Determines whether to use the brightness
compensation offour lens'corners(LSC) or not
The LSC level selectable
Max 10x digital zoomavailable(Default value is X3)
Digital zoom adjustable
Zoomed in image can be moved to horizontal
Zoomed in image can be moved to vertical
This function can be mitigates image movement
from external factors(This function uses digital
zoom)
Determines whether to use the motion detection
function or not
No display on the screen though movement is
detected
The words 'MOTION'appear on the screen when
movementis detected
Motion detection sensitivity
Set the duration ofalarmout. Ifthe way ofdisplay
is message, itmeans display time ofmessage
Determines whether to use impact detection
function or not
Sensitivity setting
Set the duration of alarm out and display time
of "IMPACT" message
LENS
LEVEL
E.SHUTTER
AGC
SENSE UP
BLC
LEVEL
LWDR
DWDR
HLC
LEVEL
DNR
LEVEL
WB MODE
R-Y GAIN
B-Y GAIN
D&N MODE
DELAY TIME
BURST
LED LEVEL
DYNAMIC IR
FLIP
SHARPNESS
GAMMA
FREEZE
LSC
LEVEL
DZOOM
ZOOM
PAN
TILT
DIS
MOTION
DISPLAY
SET
WINDOW
ALL SET
↓
SENSITIVITY
HOLD TIME
IMPACT
SENSITIVITY
HOLD TIME
Function
setting menu Select menu
Contents
Sub menu
1/60(1/50)~1/100,000
MANUAL , DC
MANUAL BLUE
MANUAL RED
BW COLOR
→
COLOR BW
→
0.45, 0.6, 1.0, USER
LOW, MIDDLE, HIGH
ALL CLEAR
↓
1. EXPOSURE
3. DAY&NIGHT
4. IMAGE ADJ.
2. WHITE
BALANCE
5. ALARM
Press the set button to move into the motion detection area section
to set the 240 blocks. To escape this menu, you should press the
left button at the far left or press the right button at the far right
Press the set button to select all area
Press the set button to remove all area
Test signal. Press the set button, color bar appeared on the screen
and press any key to return to menu
PATTERN
GENERATOR
Display each privacy mask or not.
Select mask color(8 color is available)
Select language
Display the camera ID on the screen
Defect pixel correction in low illumination
Setup the limited value ofwhite pixel correction
Setup the limited value of black pixel correction
Setup the DPC(Defect Pixel Correction) level
Internal Sync with 12V DC power
Setting the phase is selectable when used
24V AC(Dual power only)
Phase contollable at 24V AC input(L/L mode)
Monitor setting
Select the camera ID for RS-485 communication
Select baud rate
Select protocol
OFF, ON
BLACK, GRAY…
ENGLISH, …
OFF, ON
OFF, AUTO
0~255
0~255
0~255
INT
L/L
0~255
CRT, LCD
1~255
MASK 1~8
SET
WINDOW
COLOR SET
LANGUAGE
TITLE
EDIT
RESET
↓
POSITION
DPC
WHITE THR
BLACK THR
DPC LEVEL
SYNC
VPHASE
MONITOR
COM. ID
BAUDRATE
PROTOCOL
FACTORY
SET
↓
EXIT
↓
RETURN
Reset your camera to factory default condition and then restart
Notice : Lens, communication and language is not changed
Save the value and then restart
Escape the menu without save
Move back to previous menu
Camera ID setting
Camera ID reset
Camera ID position
Communication setting
Press the set button at first time, you can move the mask's
position. After press the set button again, you can adjust the size
of mask. If you press the set button once more, you can adjust
position of edge. After decided position of edge then press the
set button, it will be back to previous menu.
7. SPECIAL
6.PRIVACY
ZONE
8. EXIT
2400, 4800, 9600
PELCO-D, PELCO-P
COMMUNICATION
SAVE AND EXIT
↓
6
7
8
9
1
2
4
3
5
BAR70-L955
All manuals and user guides at all-guides.com
