https://www.zenstores.com/help/how-configure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20configure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
https://www.zenstores.com/help/how-configure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20configure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
https://www.zenstores.com/help/how-configure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20configure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
https://www.zenstores.com/help/how-configure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20configure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
https://www.zenstores.com/help/how-configure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20configure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
14105 Avalon Boulevard, Los Angeles, CA 90061 | Tel 800-465-1660 x1 | Fax 310-353-7109
www.Versatables.com
Assembly
Step 7
Step 8
Leg Actuator Switch
8A x 5/8
Wood Screw
x5
Pencil Tray
Drafting Surface
Attach the Leg Actuator
Control Switch to the Pencil
Tray using (2) 8-32 x 1/2” Phil
Pan Screws and (2) 8-32 Hex
Locknuts.
The image in the bottom right
shows which holes are needed
for this step.
M 1 2 3 4
Pencil Tray
Leg Actuator
Control Switch
8-32 x 1/2
Phil Pan Screw
x2
8-32 Hex
Locknut
x2
Pencil Tray
Attach the Pencil Tray to the
Drafting Surface using
(5) 8A x 5/8” Wood Screws
and (5) washer.
The wood screws will go into
the pre-drilled holes that are
circled in red below.
Washer
x5