3.3. Connected peripherals overview
Figure: overview of connected peripherals
The connected peripherals page shows an up-to-date overview of all peripherals in the
VersaSense IoT Fabric. For every peripheral, you can inspect and change its current sampling
rate.
Figure: clicking on a peripheral gives detailed information about current sampling rate
Note 1 – Peripheral overview generation:
the overview page is built dynamically with
information provided periodically by the edge gateway. The devices inside the network are
configured to regularly send a full picture of their current peripheral configuration. You may
speed up the overview generation process by (dis)-connecting a peripheral, since
P0x
wireless devices immediately report any change to the edge gateway.
Note 2 – Peripheral correctness and responsiveness:
The network is carefully configured to
ensure a stable and uniform distribution of bandwidth over the entire network. Therefore,
plugging in/out peripherals very rapidly after each other might not always immediately
represent the right situation on the network overview page. All VersaSense wireless P0x
devices are configured to periodically send their complete configuration in terms of their
connected peripherals. You can always speed up this reporting procedure by replugging a
peripheral.
