Before Requesting for Repair
22
ON
REV
If you need additional information, please contact your local Customer Service Center or visit
www.versapers.com. When applying for after-sales service, please have the model number and
manufacturer's serial number available. It can be found on a sticker on the bottom of the main
body.
03 The Appliance does not work.
The appliance may not operate when used for an extended period of time (more than 30 minutes).
If the hopper has not been locked into place, the appliance will not operate for safety reasons.
Check if the hopper is assembled properly.
Make sure that the power cord is properly plugged in.
Refer to instructions for assembly in the manual or consult with your Customer Service Center for
additional assistance.
It will work normally after the body (motor) cools down.
Check if the appliance is assembled according to the directions in the manual.
04 The appliance stops during normal operation.
Refer to page 17 of the manual and follow the guideline for using [REV] button.
If the issue is not resolved after following the above process, please contact your local Customer Service
Center.
Have you in heavy loads or large pieces of ingredients into the appliance?
05 There are fine lines or scratch marks around the squeezing screw.
These are molding marks resulting from the normal manufacturing process.
This is a normal product and there is no problem for use.
01 The main body itself will not work.
02 Please assemble according to the
safety sensor.
The main body itself will not work. For your safety,
this unit only works when main body is correctly
assembled with the chamber set.
correctly assembled.
For your safety, this unit only works when it's
06 Chamber set does not fit into the base.
CLOSE
position.
If the lever is in
OPEN
position, the chamber set does not fit in to the base. Before assembling
Summary of Contents for EMOTION 5G
Page 25: ...MEMO 25 ENG...
